In the daily use of the car, the bumper is very vulnerable, so the repair of the front bumper is also a very headache for the owner,

- Apr 23, 2019-

In the daily use of the car, the bumper is very vulnerable, so the repair of the front bumper is also a very headache for the owner, so how to repair the bumper? How to solve the problem of car front bumper scratches? Take a look at the introduction of Xiaobian!

Repair method of front bumper 1: visual inspection

First visually measure the extent of the depression, and have a general understanding of the heart, then touch the concave part by hand, repeat several times to determine the final damage range, and then make a reasonable repair plan. Be sure to determine the extent of the depression so that we can be targeted when we fix it.

Repair method of front bumper 2: use heating heater

Take out the heating heater, then turn on the power, turn on the heating heater, align the range of the recess, keep moving by hand, do not blow in one place, so that the front bumper can be heated evenly, there is a need for everyone Note that the distance between the heating fan and the front bumper must be controlled between 10 and 15 cm. Don't be too close or too far. It is too close to hurt the front bumper. Too far is not enough heat.

Repair method of front bumper 3: quickly flatten the bulge

After the heating fan is blown for a while, turn it off, set it aside, then take out the screwdriver and press the recessed part from the inside of the front bumper. We observe a bump in the front bumper. All we need to do is to flatten the bumps. Pay attention to it as quickly as possible. Don't wait for the front bumper to be cold. Press it again, it will be very laborious, and it will also lower the front bumper. ,Affect the appearance.

Repair method for front bumper four: check

After flattening, we will return to the concave part of the front bumper and touch it by hand repeatedly to feel if it is flat. If there is still a small depression, simply find it up until the front bumper surface is flat. The repaired front bumper should be placed on the shelf so that the entire dent repair process is over.

The method of repairing the front bumper is very simple, and the tools used are also very simple. Although the front bumper is very simple to repair, the owner does not have to worry about the damage to the front bumper, but it is necessary to protect the car when it is used.